Jump to content

Retrofit Project : DIY OEM Projector ใส่โคม FD


Recommended Posts

สั่งตอนนี้ไม่ทัน ไม่ทันมาตั้งแต่อาทิตที่แล้วและ คนจีนออกจากโรงงานกลับบ้านกันหมด ไม่ตอบเมลเลย

 

คงต้องรอหลังตรุษจีนทั้งอาทิตย์ละมัง เห็นคนจีนที่ทำรถไฟฟ้าก้อลากลับยาว มาอีกทีกลางกุมภา อุป๊ะ

Link to comment
Share on other sites

  • Replies 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

พี่เค้ามานานแล้ว 

 

 

NHK D2S EXCLUSIVE Square hid projector lens has a wide coverage of low beam, colorful sharp cutting line and concentrated full beam.

 

Detail information:

1. Models for xenon bulb:D1S D2S D3S D4S;

2. High light condensing, easy installation;

3. Good vibration resistance and stable emitting;

4. Durable and non-fading brilliant beams.

ตัวนี้ใช่Q5ไหมคับ แสงรูปสุดท้ายสวยๆเลย อยากสั่งแล้วคับ พี่ๆจะสั่งกันรึยังคับ ผมขอแบบตูดนะง่ายดี

 

H4 cars models can be installed directly with the unique matching accessories. There is no need to damage the reflector lamp bowls.

 Its cutting light is perfect.

 

 710135000_660.jpg710135003_331.jpg710135008_597.jpg710135012_786.jpg710135016_186.jpg710135019_521.jpg710138072_568.jpg710138077_404.jpg710138082_006.jpg710138088_003.jpg713145553_212.jpg713145555_922.jpg

Link to comment
Share on other sites

  • 2 weeks later...

น่าสนใจมาำก rx350  custom curve shield 

 

 

 

I finally got a hold of the RX350 BX projector, with special thanks to forum member 'paleryeder'. Upon examining the projector, the reflector bowl has the same quality as the rx330, but the front-half lens holder is very Bosch-like, with 4 mounting legs and uses a metal ring to hold the lens in place. It has a flat flippable shield that is not completely straight from side to side. The middle of the shield is higher than the sides, which blocks the reserved highbeam. I have some reservation on this projector already.

So I took it out for a comparison test with the the TL bixenon. The RX350 is equipped with an STi-R lens and the TL is equipped with a ZKW-R lens. No lens spacer were used.

Again, keeping the same environment settings with my other posts. Car is parked about 45ft from wall. Projectors used 35w D2S 85122+ (no Hg) bulb and 35w Matsushita G3 ballast. Nikon D60 camera manual setting with ISO800, Aperture 1/4', and F6.3. All pictures were taken on the same night (04-15-2011) on a clear sky with a full moon behind building.


RX350-BX vs. TL-BX (Distant Shot)
DSC_5083h.jpg
DSC_5085h.jpg

Here's an animated GIF:
DSC_5083_5085h.gif

Both have about the same width, but the RX350 has better side intensity.


RX350-BX vs. TL-BX (Closeup Shot)
DSC_5080h.jpg
DSC_5086h.jpg


Center-wise, the RX350-BX lowbeam is not as intense as the TL-BX. The shield is the culprit, blocking too much light reserved for high beam.

RX350-BX: Low and High (Distant)
DSC_5083h.jpg
DSC_5082h.jpg

Here's an animated GIF:
DSC_5082_5083h.gif

You can see a dip in the center of the RX350 output. The cutoff beam is not completely straight from side to side.

RX350-BX: Low and High (Closeup)
DSC_5080h.jpg
DSC_5081h.jpg

Here's an animated GIF
DSC_5080_5081h.gif


The TL-BX has a better distribution of lowbeam and highbeam:

RX350-BX: Low and High (Distant)
DSC_5085h.jpg
DSC_5084h.jpg

Here's an animated GIF
DSC_5084_5085h.gif


So as it stands, the TL is the better projector in terms of center intensity and even spread. I think the RX350 would be a good candidate for a shield mod, making it better than the TL.

_______________________________


RX350-BX With Custom Curve Shield (updated 04.21.2011)

I took off the bixenon shield and fired up the RX350 projector to see how light is being distributed. Like other Koito projectors (sk2, sc430, and rx330), the rx350 has similar pattern with high concentration of light in the center and just below the cutoff along the sides:

DSC_5079h.jpg

In the pic above, the blue dotted line represents the oem cutoff showing the dip in the center with lots of reserved for the highbeam. The red dotted line represents the modded rx350 with a custom curve shield to make the cutoff straight and thus exposing the reserved highbeam.


Oem RX350 vs. RX350-CS (Distant Shot)
DSC_5083h2.jpg
DSC_5078h.jpg


Here's an animated GIF:
DSC_5078_5083h.gif


Let's see how the TL stacks up against the modded RX350.


Oem TL vs. RX350-CS (Distant Shot)
DSC_5085h2.jpg
DSC_5078h.jpg


Here's the animated GIF:
DSC_5078_5085h.gif

It's an improvement over the 'oem rx350 vs. oem tl' comparison above, with a better center as well as on the sides. Here's the closeup of the comparison.


Oem RX350 vs. RX350-CS (Close-up Shot)
DSC_5080h.jpg
DSC_5075h.jpg

Here's the animated GIF:
DSC_5075_5080h.gif


Oem TL vs. RX350-CS (Closeup Shot)
DSC_5075_5086h.gif


So there you have it. Enjoy.

 

Link to comment
Share on other sites

ใครสนใจอะไรมาแปะๆ ไว้ด่วนนะจ๊ะ เดี๋ยววันจันทร์จะส่งออเดอร์ของให้ดิว ได้จัดพร้อมๆเลย งวดเดียว

Link to comment
Share on other sites

ผมสนใจเจ้าตัวที่ให้คัทออฟตัวนี้คับ

JcjR9J.jpg

1.อยากถามก่อนว่าเจ้า XGY_2013_newest_D2S_EXCLUSIVE/NHK Q5 D2S ให้แสงใกล้เคียงแบบนี้ได้รึป่าว

2K0iG6.jpg

2.เชาว Cayenne_B_shrouds

0ALO8q.jpg

3.รีเลย์ XGY_HQ_H4_HID_Relay_harness_Wiring

BEeO8U.jpg

รวมค่าใช้จ่ายเท่าไหร่ หากเกินงบจะได้ตัดบางตัวออกคับ

ขอบคุณพี่ทอมมี่ล่วงหน้าคับ

Link to comment
Share on other sites

อันนี้ของดิว โอเคป่าว 

 

1 Mini H1 3.0" clearlens   35$
2 H1 Bulb 55W 5000K 18.26$
3 Ballast 55 W 35$
4 Shroud cayenne 12$
5 Pigtail HB4 to CN ballast 5$
6 Koito waterproof cover 83 mm 10$
 
sum    $115.26
Ship    $53.00
Paypal $8.41
Tax     $34.58
total    $211.25  THB 7,182.53
Link to comment
Share on other sites

อันนี้ของโจ

 

เค้าบอกว่าแสงเหมือนกันคับ ตระกูล NHK ใช้ reflect และ Shield หล่อขึ้นรูปเหมือนกันคับ

ไม่ชอบเหลี่ยมเหรอ ราคามันเท่ากันเลย ดูไฮกว่าอีก  :D

 

1 NHK Q5 D2S   60$
2 H4 harness     10$
3 Cayenne_B_shrouds 12$
 
sum $82.00
Ship $53.00
Paypal    $6.75
Tax        $24.60
total $166.35 THB 5,655.90
Link to comment
Share on other sites

ตัวค่า Ship ค่า TAX เดี๋ยวได้ราคารวม จะหารแชร์กันอีกนะคับ อันนี้ผมเข้าโปรแกรมที่เค้าให้มาเลยออกมาเป็นออเดอร์แต่ละคน ค่าส่งขั้นต่ำDEPEXที่ 53$ 

Link to comment
Share on other sites

 

อันนี้ของดิว โอเคป่าว 

 

1 Mini H1 3.0" clearlens   35$
2 H1 Bulb 55W 5000K 18.26$
3 Ballast 55 W 35$
4 Shroud cayenne 12$
5 Pigtail HB4 to CN ballast 5$
6 Koito waterproof cover 83 mm 10$
 
sum    $115.26
Ship    $53.00
Paypal $8.41
Tax     $34.58
total    $211.25  THB 7,182.53

 

 

อ่ะเคร คับนาย จัดมา ขอบคุณมากๆครับนาย

Link to comment
Share on other sites

อันนี้ของโจ

 

เค้าบอกว่าแสงเหมือนกันคับ ตระกูล NHK ใช้ reflect และ Shield หล่อขึ้นรูปเหมือนกันคับ

ไม่ชอบเหลี่ยมเหรอ ราคามันเท่ากันเลย ดูไฮกว่าอีก  :D

 

1 NHK Q5 D2S   60$

2 H4 harness     10$

3 Cayenne_B_shrouds 12$

 

sum $82.00

Ship $53.00

Paypal    $6.75

Tax        $24.60

total $166.35 THB 5,655.90

จริงๆก้อชอบคับ เลเห็นว่ามัน3" ถ้าเปลี่ยนก็คงต้องเลือกใหม่หมด คงไม่ทัน

ขอปรึกษาพี่ทอมมี่เพิ่มเติมคับว่ารีเลย์ที่ผมเลือกมันถูกต้องไหมคับ

ขอบคุณพี่มากๆคับ

Link to comment
Share on other sites

โจเอาไปใส่ H4 เหรอคับ ถ้าเอาปลอดภัยเดี๋ยวผมย้ำเค้าว่าเอาไปใช้กับ H4 อีกที  รูปมันใช่นะ ถูกแล้ว

 

แต่ผมแปลกใจตรงราคา ทำไมเกินหน้าเวบ หน้าเวบมัน 8.5$ เอง เดี๋ยวก๊อบหน้าจอไปให้เค้าดูก่อน บางไอเท่มผมเคยเจอเค้าก๊อบรูดๆเพลินๆมา 

 

บางตัวก๊อบต่อๆมา แล้วราคาถูกผิดปกติเราก้อเงียบ ตัวไหนแพงเกินหน้าเวบ เจอกัน 555  :D

Link to comment
Share on other sites

โจเอาไปใส่ H4 เหรอคับ ถ้าเอาปลอดภัยเดี๋ยวผมย้ำเค้าว่าเอาไปใช้กับ H4 อีกที  รูปมันใช่นะ ถูกแล้ว

 

แต่ผมแปลกใจตรงราคา ทำไมเกินหน้าเวบ หน้าเวบมัน 8.5$ เอง เดี๋ยวก๊อบหน้าจอไปให้เค้าดูก่อน บางไอเท่มผมเคยเจอเค้าก๊อบรูดๆเพลินๆมา 

 

บางตัวก๊อบต่อๆมา แล้วราคาถูกผิดปกติเราก้อเงียบ ตัวไหนแพงเกินหน้าเวบ เจอกัน 555  :D

จะเอามายัดในโคมเดิมfdตัวเองนี่แหละคับ ไม่รุ้ว่าเลือกถูกไหม

สรุปว่าเปลี่ยนเป็นแบบเหลี่ยมไม่ทันใช่ไหมคับ อีกเรื่องคับพี่ผมลืมลงพลาสติกตัวครอบไฟวงแหวนอ่ะคับ ไม่แน่ใจว่าต้องสั่งซื้อเพิ่มรึป่าว

ขอบคุณพี่ทอมมี่ล่วงหน้ามากๆคับ ส่วนเรื่องรายละเอียดการโอนเงิน เดี่ยวpmมาถามคับ

Link to comment
Share on other sites

โห เดี๋ยวนี้ต่อยอดกันไปถึงไหนแล้วเนี่ย 555 ตามไม่ทันแล้ว

 

เดี๋ยวนี้ของเล่นมีเยอะกว่าแต่ก่อนมาก หาไม่ยากด้วยคุณเกรซ เลยสนุกกันใหญ่  :D

Link to comment
Share on other sites

ยังมิได้สั่งดอกนาย แค่ขอ Quotation เค้าไป ตอนนี้ยังสั่งได้ทุกแบบคับ 

 

ถ้าจะสั่งเดี๋ยวผมต้อง confirm ราคาและโอนเงินก่อนคับ สั่งเค้านี่คือผมต้องจ่ายเค้าเลยน่ะ

 

ตัว Shroud ตามรูปคับ รูปมีวงแหวน ตัวจริงก้อมี มันเป็นเซต :D

Link to comment
Share on other sites

ยังมิได้สั่งดอกนาย แค่ขอ Quotation เค้าไป ตอนนี้ยังสั่งได้ทุกแบบคับ 

 

ถ้าจะสั่งเดี๋ยวผมต้อง confirm ราคาและโอนเงินก่อนคับ สั่งเค้านี่คือผมต้องจ่ายเค้าเลยน่ะ

 

ตัว Shroud ตามรูปคับ รูปมีวงแหวน ตัวจริงก้อมี มันเป็นเซต :D

คับผม
Link to comment
Share on other sites

มาอัพเดต เค้าตอบกลับมาตั้งนานละ ดันไปค้าง Junk mail งงเลย เมลบริษัทเค้าตั้งค่าใหม่ 

 

เดี๋ยวจะสั่งให้อาทิตย์นี้ละนะ 

 

ตอนนี้มีของดิว 

 

1 Mini H1 3.0" clearlens   35$
2 H1 Bulb 55W 5000K 18.26$
3 Ballast 55 W 35$
4 Shroud cayenne 12$
5 Pigtail HB4 to CN ballast 5$
6 Koito waterproof cover 83 mm 10$
Link to comment
Share on other sites

ป๋า ฝากอันนี้ด้วย 1 อัน  ผมทำเสียไปอันนึง ปาดซะเสียของเลย

 

6 Koito waterproof cover 83 mm 10$

 

ขนาดเท่ากับของเดิมที่เคยสั่งใช่ป่าว

Link to comment
Share on other sites

ผมกะซื้อใหญ่กว่าเดิมนิดนะตาต้น ตัวเดิมมันดึงๆไปหน่อย ชอบเลื่อน 

Link to comment
Share on other sites

ผมกะซื้อใหญ่กว่าเดิมนิดนะตาต้น ตัวเดิมมันดึงๆไปหน่อย ชอบเลื่อน 

 

ผมฝากซื้อขนาดเดิมหน่ะ ทำเสียไปอันนึง จะเอามาทำอีกโคมนึง ข้างเดียวเขาขายป่าวหว่า  :P

Link to comment
Share on other sites

ป๋า ฝากอันนี้ด้วย 1 อัน  ผมทำเสียไปอันนึง ปาดซะเสียของเลย

 

6 Koito waterproof cover 83 mm 10$

 

ขนาดเท่ากับของเดิมที่เคยสั่งใช่ป่าว

ผมฝากซื้ออันนีัด้วย 1 คู่ ยังทันมั๊ยครับพอดีกำลังรวบรวมของจะทำครับ แล้วมันใส่กับโคม 1.8 ได้ป่าวครับ

Link to comment
Share on other sites

มันใส่กับ 1.8 นี่แหละคับ  :D

 

เดี๋ยวรวมๆ อีกที ช่วงนี้ยุ่งนิดนึงทำงานศพคุณยาย เดี๋ยววันจันทร์ รวมแล้วสั่งละ เดี๋ยวดิวรอนาน 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...